TCI MP32 K2 multifunctional LED driver by dip switch adjustable for different voltages and currents.
CONSTANT CURRENT.
- 15W (15W)² max. 47V 350mA
- 24W (15W)² max. 47V 500m
- 25W (15W)² max. 47V 550mA
- 32W (15W)² max. 46V 700mA
- 20W (15W)² max. 24V 850mA
- 20W (15W)² max. 22V 900mA
CONSTANT TENSIONS
- 10W (10W)² 10V max 1050mA
- 13W (13W)² 12V max 1050mA
- 20W (15W)² 24V max 1050mA
²Maximum power in use with 110V.
Features
- Multipower driver supplied with dip switch for output current selection.
- IP20 independent driver, for indoor use (MP 32 K2).
- Class II electric shock protection for direct or indirect contact (MP 32 K2).
- It can be used for lighting equipment in protection classes I and II (MP 32 BI).
- Active power factor corrector.
- Current control ±5% including temperature fluctuations.
- Supplied with connection cover and cable holder.
- Input and output terminals on the same side (wire cross section up to 1.5 mm2/AWG15).
- Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 8 mm (MP 32 K2).
- Driver can be secured with slot for screws.
- Protection:- against overheating and short circuits; - against mains voltage surges;- against overload.
- Thermal protection = C.5.a.
- TECHNICAL DATA
